Technical specifications

Dimensions: 72" (183 cm) long by 12" (30 cm) wide by 2.5" (6.35 cm) high.

Channeled bottom: 2 x 1" (2.54 cm) channels for protection of cabling, wire, hose or pipes. Removable and relocateable, this product is also flexible, allowing conformity to the contour of any road surface.

Superior construction: will not warp, crack, chip or rot. Resistant to UV light, moisture, oil and extreme temperature variations.

Visibility: each speed bump comes with integrally molded reflective traffic tape and “Cat Eye” reflectors for high visibility.

Environmentally Friendly: best of all, each speed bump effectively recycles 3 scrap tires, taking them out of the waste stream permanently. The speed bumps themselves are 100% recyclable.

Mounting Pins: available for asphalt and concrete installation

Installation Facts

• Easily installed by one person
• Permanent or temporary installation with lag bolts and shields or rebar spikes
• For installation on asphalt, pre-drill 3/8 inch hole (1 cm) through the asphalt and drive the anchors in.
• For installation on concrete, pre-drill a 3/8” (1 cm) hole 3.5” (9 cm) deep, drop in sleeve and attach the speed bump to the sleeve with the 5” (12.5 cm) lag bolt.
• The rubber speed bumps can also be installed using any industrial grade construction adhesive or epoxy adhesive onto concrete.
• Mounting Pins available for asphalt and concrete installation